Connection To A Personal Computer - JVC GR-DA20EK Instructions Manual

32
EN Editing
Connection To A Personal
Computer
PC with DV connector
When connecting the camcorder to a PC using
a DV cable, make sure to follow the procedure
below. Connecting the cable incorrectly may
cause malfunctions to the camcorder and/or the
PC.
● Connect the DV cable first to the PC, and
then to the camcorder.
● Connect the DV cable (plugs) correctly
according to the shape of the DV connector.
To DV OUT
Core filter
DV cable
(optional)
Core filter
To DV
connector
or
It is also possible to transfer moving images to
a PC with a DV connector by using the
software equipped with the PC or commercially
available software.
If you are using a Windows
®
Windows Messenger to conduct video
conferences over the Internet, using a
camcorder. For details, refer to the help for the
®
Windows Messenger.
Notes:
●
It is recommended to use the AC Adapter
as the power supply instead of the battery
pack. ( 13)
●
When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.
●
The date/time information cannot be captured
into the PC.
●
Refer to the instruction manuals of the PC and
Software.
●
The system may not work properly depending
on the PC or capture board you are using.
●
If, after connecting a DV cable to the
camcorder and it doesn't work, restart the
camcorder.
®
●
Microsoft Windows
and
registered trademarks or trademarks of
Microsoft Corporation in the United States and/
or other countries.
®
XP, you can use
®
are either