Playback Menus; On Screen - JVC GR-DA20EK Instructions Manual

The settings below are effective only for video playback.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made,
and plays the sound back. Select the type of sound to accompany your playback picture.
Menus
NARRATION
SOUND L/R
BLANK
SEARCH
Each setting (except "OFF" in "ON SCREEN", "DATE/TIME", and "TIME CODE") is linked with
"DISPLAY", which appears when the Power Switch is set to "REC".
The parameters (except "OFF" in "ON SCREEN" setting) are the same as in the description on.
( 23)
Menus

ON SCREEN

DATE/TIME
CLOCK ADJ.
TIME CODE
16:9
OUTPUT
BRIGHT
SYSTEM
Each setting (except "DEMO MODE") is linked with "SYSTEM", which appears when the Power Switch is
set to "REC".
The parameters are the same as in the description on page

Playback Menus

Although it is not possible to perform audio dubbing with this
camcorder, you can hear sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both "L" and "R" channels in
stereo.
ON: Dubbed sound is output on both "L" and "R" channels in
stereo.
MIX: Original and dubbed sounds are combined and output in
stereo on both "L" and "R" channels.
[STEREO ]: Sound is output on both "L" and "R" channels in stereo.
SOUND L : Sound from the "L" channel is output.
SOUND R : Sound from the "R" channel is output.
[CANCEL] / EXECUTE
OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
[OFF] / ON
14, "Date/Time Settings"
[OFF] / ON
17, "Time Code"
[4:3TV] / 16:9 TV
23, "16:9 OUTPUT"
15, "Brightness Adjustment Of The Display"
Menus For Detailed Adjustment
Settings: [ ] = Factory-preset
19, "Blank search".
Settings: [ ] = Factory-preset
24
.
25
EN