Specifications - Makita DHR263 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery indicator
4-1. Switch trigger
5-1. Lamp
6-1. Reversing switch lever
7-1. Quick change chuck for SDS-plus
7-2. Change cover line
7-3. Change cover
8-1. Spindle
8-2. Quick change drill chuck
8-3. Change cover line
8-4. Change cover

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Note: Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Explanation of general view
9-1. Rotation with hammering
10-1. Rotation only
11-1. Hammering only
12-1. Grip base
12-2. Teeth
12-3. Loosen
12-4. Tighten
12-5. Side grip
12-6. Protrusion
13-1. Bit shank
13-2. Bit grease
14-1. Bit
14-2. Chuck cover
15-1. Bit
15-2. Chuck cover
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
noise level determined
) : 94 dB (A)
pA
) : 105 dB (A)
WA
value (tri-axial vector
DHR263
350 mm
4.6 kg
ENE043-1
Model DHR263
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DHR264
Work mode : hammer drilling into concrete
ENG900-1
Vibration emission (a
Uncertainty (K) : 1.5 m/s
sum)
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
16-1. O symbol
16-2. Action mode changing knob
18-1. Depth gauge
19-1. Dust cup
21-1. Blow-out bulb
23-1. Chuck adapter
23-2. Drill chuck
24-1. Tighten
24-2. Drill chuck
25-1. Sleeve
25-2. Ring
25-3. Quick change drill chuck
26-1. Limit mark
27-1. Brush holder cap
27-2. Screwdriver
DHR264
26 mm
13 mm
32 mm
0 - 1,250
0 - 5,000
374 mm
4.7 kg
D.C. 36 V
2
) : 14.5 m/s
h,HD
2
) : 14.0 m/s
h,CHeq
2
2
) : 3.0 m/s
h,D
2
2
) : 15.5 m/s
h,HD
2
) : 14.0 m/s
h,CHeq
2
2
2