Power Off; Changing Modes; Pcs Function; Error Codes - Smart Weigh Shipping and Postal Scale Manual

1. To turn the scale off, press the ON/OFF button.
2. The scale will automatically switch-off after 2 minutes whether weight is on the scales or
not, if no change of weight occurs in this time.
1. The scale includes 4 different weight units: kg, g, lb:oz, lb.
2. Press the MODE key to change the scale's displayed unit of measure.
1. Turn on the scale and wait until the LCD displays "0.0"
2. Place the reference weight on the scale. Press and hold the PCS button until "100"
appears on the display. Press the MODE button to change the sample quantity (25, 50,
75, or 100), to match the reference weight.
3. Press the PCS button once again to confim it.
4. You can now add products on the scale platform and the display will show the count.
5. Reference weight of the counting function will be saved even when turning the scale off.
It will not be deleted untill you save a new weight of counting.
1. Negative weight display - Press the TARE button again to re-zero the scale.
2. O.Ld – Maximum capacity exceeded. Remove the extra weight to avoid damaging the
load cell.
3. Lo- batteries are low, replace the batteries.
Product Manual

Power Off

Changing Modes

PCS Function

Error Codes

5