Battery Installation; Operation; Changing Modes; Tare Weighing - Smart Weigh top2kg User Manual

Packaging material was placed in the battery compartment to prevent any
battery drainage during shipping and storage.
1. Prior to using your scale for the first time, remove the plastic
insulation strips from the compartment.
2. When replacing the batteries, make sure to correctly align the positive
and negative contacts.
1. Place the scale on a flat, level surface, press [ON/OFF] key to turn on
the scale.
2. Wait until "0.0" is displayed, you are ready to weigh.
3. Place the object(s) in the weighing platform.
4. Wait a few seconds for the display to stabilize before taking a weight
reading.
1. Press the M key to change the scales displayed unit of measure.
2. If the scale is turned off then back on, it will by default turn on the last
unit used.
1. You can use the tare feature to subtract the weight of an empty box or
container for net weight determination. (The weight of the container
will subtract from the available capacity)
2. Turn on the scale as described above.
3. Place the "tare item" on the platform.
4. Press [TARE], key and wait until "0.0" is displayed.
5. Add the "net-weight item" the display now will show the net- weight
of the contents.
6. To return to normal weight display (gross weight), remove any items
from the weighing platform and press the T key again to re-zero the
scale.
4

Battery Installation

Operation

Changing Modes

Tare Weighing

Product Manual