Advanced; About - TP-Link Archer T6E User Manual

Archer T6E/T8E/T9E

4.2 Advanced

The following configurations can be made on the Advanced page:
1) To select wireless configuration tool.
Here you can decide which tool to use, either the TP-LINK Configuration Utility or the
Windows wireless configuration tool. (This option is available only in Windows XP.)
2) To switch to another wireless network adapter.
Here you can switch to another adapter installed in your computer. The adapters
successfully installed in your computer will be listed in the drop-down list if the adapters are
supported by this utility.
3) To switch to SoftAP mode.
Windows 8.1.)
Once enabled, the adapter will be able to work as an AP.
4) To change the power save mode. The default option is OFF.

4.3 About

The About screen gives you some information about the Driver and Utility versions of the
adapter. Right-click the
802.11AC Wireless Dual Band PCI Express Adapter User Guide
(This option is available in Windows 7, Windows 8 and
Figure 4-11
icon in your system tray and select About from the list.
Figure 4-12
34