Changing The Styling Attachments; Operation; Cleaning And Care - Grundig HS 5520 Manual

HAIR STYLER HS 5520
Cool shot
F
– : Interrupts heating and provides a cool air
flow
Changing the styling
attachments
Detach the attached styling attachment
1
pressing on the catch (on the back of the appli-
ance) and turning the hot air brush slightly
B
to the right.
2 Place another styling attachment on so that the
recess and the catch
appliance) are in line and turn slightly to the
left until it clicks.
Note:
The diameter of the styling attachment influ-
7
ences the size of the curls. By using the styling
attachment ø 50 mm you can achieve an espe-
cially large volume for long hair.

Operation

Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
Thoroughly towel dry your hair after washing.
1
Plug the power cord into the wall socket.
2 D
Turn on the appliance with the switch
3
set the required temperature level/blower level.
10
ENGLISH
by
A
B (on the back of the
C and
_______________________________________
4 If necessary, interrupt heating by pressing and
holding down the
Note
Cool Shot interrupts heating and provides a
7
cool air flow. This allows you to fix your hair-
style better and more lastingly.
After use, switch off the appliance with the
5
switch and pull the plug of the mains
cable out of the socket.
D
Note
Never wind the mains cable around the appli-
7
ance, because this can cause damage.
Please check the appliance and the cable regu-
larly for visible damage.

Cleaning and care

Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille
sionally with a soft brush to remove hairs and
dust.
button (Cool Shot).
G
G occa-
C