Wfl 2060 Not Running - Bosch WFL 2060UC Training Program

76
WFL 2060 Service Tips
WFL 2060 Service Tips
WFL2060 drain pump is
located at washer right
front
viewing rear of washer)
Push on white (or gray) drain
pump electrical connector (if
it has been pulled off).
IMPORTANT
Shipping bolt
locations
NOTE:
demonstration and not reconfigured for normal use when they were sold.
corner (photo
HINT:
drain motor first to see if its connected.
NOTE:
mode since the control senses the drain motor during start up.
HINT:
and not reconfigured for normal use, all lights will turn on and washers
won't run. If this occurs, check the drain motor first.
HINT:
all tape adhesive residue to insure good electrical connections.
HINT:
•
•
•
--

WFL 2060 Not Running

-- WFL 2060 Not Running
WFL2060
Occasionally,
WFL2060
When repairing
WFL2060
washers cannot be set up for sales demonstration
WFL2060
If washers have been set up for sales demonstration
If electrical tape has been used on the washer, carefully clean off
WFL2060
When repairing
motor has been disconnected for sales display, please check the
following:
Make sure the drain motor is reconnected.
Make sure the fuscia label has been removed from the rear of the the
washer.
Make sure the shipping bolts have been removed.
washers have been set up for sales
washers that won't run at all, check the
washers that won't run at all, if the drain
1st Edition/Revision 5 (1/20/04)