Wfl 2060 Service Tips; Configuring; Replacement Control Modules - Bosch WFL 2060UC Training Program

42

WFL 2060 Service Tips

WFL 2060 Service Tips
Replacement WFL 2060 control modules (# 481304) aren't configured. Please
follow these instructions to set on-board switches to configure replacement modules.
Static electricity can damage
CAUTION:
module components.
modules from static electricity.

Replacement Control Modules

Replacement Control Modules
Take care to shield
--

Configuring

-- Configuring
If settings aren't done correctly,
CAUTION:
washers can eventually be damaged!
Switch S1
Switch # Setting
1
off
2 Sets spin speed to 1000 RPM max.
on
3
on
4
off
Sets panel buttons to Power Wash ,
5 Rinse Plus & Quick Wash and
on
enables spin selector knob.
6
off
7 Sets hot water inlet on.
off
8 U.S. model variations enabled.
on
Switch S10
Switch # Setting Notes
1
on
2
off
Notes
Modules
HINT:
cannot be configured
using the washer
control panel.
1st Edition/Revision 5 (1/20/04)