Security Settings - Fax; Printing Fax Reports - Epson WF-2750 User Manual

Setting
Rings to Answer
Remote Receive
Parent topic:

Security Settings - Fax

Set the security options you want to use for fax data.
Setting
Backup Data Auto Clear Off
Clear Backup Data
Parent topic:

Printing Fax Reports

You can select from several fax reports to print whenever necessary. You can also have the fax log
printed automatically by selecting Setup > Fax Settings > Output Settings > Fax Log Auto Print.
1. Press the
2. Press the up or down arrow button, select Fax, and press the OK button.
Options
1 to 9
Off
On
Start Code
Setting Up Fax Features Using the Product Control Panel
Options
On
—
Setting Up Fax Features Using the Product Control Panel
home button, if necessary.
Description
Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to for answering a call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you enable this function, you
need to set a Start Code. If you are using a cordless
handset whose base is connected to the product, you
can start receiving the fax by entering the code on the
handset.
Description
Automatically erases sent or received fax data
remaining in your product's memory
Deletes all sent or received fax data remaining in your
product's memory; run this function if you are giving
away or disposing of your product
164