Receive Settings - Fax - Epson WF-2750 User Manual

Setting
Dial Tone Detection
Line Type
Header
Parent topic:

Receive Settings - Fax

Set the receive options you want to use for incoming faxes.
Setting
Receive Mode
Distinctive Ring
Options
On
Off
PSTN
PBX
Fax Header
Your Phone Number
Setting Up Fax Features Using the Product Control Panel
Options
Manual
Auto
All
Single
Double
Triple
Double&Triple
Description
Automatically dials the number you enter for faxing
when the product detects a dial tone.
Turns off automatic dial tone detection, which may be
necessary if the product is connected to a PBX
(Private Branch Exchange) or a TA (Terminal
Adapter). The product may drop the first digit of a fax
number and send the fax to the wrong number.
Selects a standard phone line (Public Switched
Telephone Network).
Selects Private Branch Exchange, the type of phone
line used in office environments where an access
code such as 9 must be used to call an outside line
Lets you set up the header information for outgoing
faxes.
Description
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product.
Automatically receives and prints faxes.
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
product can receive faxes on the correct number of
rings. All works for phone lines that do not use this
service.
163