GE JET344 Use And Care Manual page 21

Setting the Oven Controls
Step 1: ksert temperature probe in food as shown
below. Plug other end of probe securely into oven
2:
Step Touch Microwave
MICRO COOK.
3:
Step
1,3, and O.
Step 4: The oven will temperature cook automatically
at power level 10, unless a different power level
is selected.
How to Use the Temperature Probe
Place probe so that point rests in
center of the thickest meaty part
of roast, or into the cut end or
meatiest part of boneless ham or
lamb. Point should not touch bone,
fat or gristle. For bone-in ham or
lamb, insert probe into center of
lowest large muscle or joint.
Questions and Answers
Q. Why did "PROB" flash on the display after I
touched the START pad?
A. "PROB" will flash if you don't seat the cable
end of the probe securely into the receptacle
in the oven wall.
Touch the number pads
Insert probe into meatiest part of
inner thigh, below and parallel to
the leg of a whole turkey.
How to Change Power Level
1. Press Microwave MICRO COOK.
2. Select cooking temperature.
3. Press POWER LEVEL.
4. Select power.
5. Press START.
Step 5: Touch START to begin cooking.
temperature is below 80°F. After 80°F. is
temperature as it rises. When food reaches
the preset temperature, "Hold" flashes,
oven signals and holds temperature.
For dishes such as meat loaf or
casserole, insert probe into center.
Q. Can I leave the probe in the oven if it's not
inserted in the food?
A. No. If the probe is touching the oven wall, and is
not inserted into food, you may damage the oven.