Emerson unidrive m300 Quick Start Manual page 6

The harmonised standards used are shown below:
EN 61800-5-1:2007
EN 61800-5-2:2007
EN ISO 13849-1:2008
EN ISO 13849-2:2008
EN 62061:2005
Person authorised to compile the technical file:
C Hargis
Chief Engineer
Newtown, Powys. UK
IMPORTANT NOTICE
These drive products are intended to be used with appropriate motors, sensors, electrical protection
components and other equipment to form complete systems. It is the responsibility of the installer to
ensure that the design of the complete machine, including its safety-related control system, is carried out
in accordance with the requirements of the Machinery Directive and any other relevant legislation. The use
of a safety-related drive in itself does not ensure the safety of the machine.
Compliance with safety and EMC regulations depends upon installing and configuring inverters correctly.
The inverters must be installed only by professional assemblers who are familiar with requirements for
safety and EMC. The assembler is responsible for ensuring that the end product or system complies with
all the relevant laws in the country where it is to be used. Refer to the User Guide.
6
Adjustable speed electrical power drive systems. Safety requirements. Electrical,
thermal and energy
Adjustable speed electrical power drive systems. Safety requirements. Functional
Safety of machinery. Safety-related parts of control systems. General principles for
design
Safety of machinery. Safety-related parts of control systems. Validation
Safety of machinery. Functional safety of safety related electrical, electronic and
programmable electronic control systems
T. Alexander
VP Technology
Date: 9th April 2014
Place: Newtown, Powys. UK
Unidrive M300 Quick Start Guide
Issue Number: 5