Table of Contents
Advertisement
M e d i u m - s i z e d g a s b o i l e r
Never install the boiler in the following areas.
Do not install the boiler near the electric equipment.
Do not install the boiler in an uneven or unstable place.
Do not install the boiler in a place with highly combustible materials.
Do not install the boiler in a place inadequate for safe gas piping installation.
Do not install the boiler in a place with special chemical agents
(generating combustible or corrosive gas).
Do not install the boiler in a place where it is difficult to get access to the
stairway or the exit for escaping.
Do not install the boiler in a place which is not well drained.
Do not install the boiler below the shelf with unstable objects.
Do not install the boiler in a place where it is difficult to conduct
maintenance of the boiler after installation.
Do not install the boiler in a place with noise and air pollution.
Do not install the boiler in a place where the wind generated from a vent, a
range, and a hood have an impact on the air intake and exhaust.
Do not install the boiler in a place which is not well-ventilated.
Do not install the boiler in a place with strong wind.
Do not install the boiler in a place where it is difficult to install the
chimney pipe (chimney).
Be sure to install the boiler in a sufficient place for check up and repair of
the boiler.
A space of more than 1m shall be provided in front of the boiler, in order to
perform maintenance and checks.
Never install the boiler in a moist or enclosed
place such as a bathroom, a toilet.
Incomplete combustion, caused by oxygen
deficiency, may lead to a carbon oxide poisoning.
Installation in the above place may also cause
earlier product malfunctions.
Never install the product with corrosive gas
such as ammonia, chlorine, sulfur, acids.
Corrosive gas may damage the boiler and cause
incomplete combustion, eventually leading to a
carbon oxide poisoning.
Other considerations
35
Hide quick links:
Advertisement
Table of Contents
