Advertisement
Available languages
Available languages
8. Insert one Wood Dowel (N) into each of the
pre-drilled holes on the top edges of the
Assembly from step 7. Then locate
Mantel/Top (G) and lay f nished side up on
top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolt (L) and
Washer (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
9. Using Phillips head screwdriver tighten all
Bolts alternating top and bottom, left and
right.
10. Remove the two mounting brackets attached
to the back of the Left and Right Front
panels. Set aside with the wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUCTIONS
PRIOR TO INSTALLING ELECTRIC
INSERT IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR FIREPLACE
11. Lift insert carefully into the back of the unit
and center in the insert opening. Do not drag
insert across Hearth/Base (A) as it may
scratch your unit.
12. Install the mounting brackets to hold insert
f ush against the inside of the mantel front
panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS
FINAL POSITION.
E-4
E-4
Mantel/Top
G
N
N
N
M
L
Mounting
Bracket
Electric
Fireplace Insert
Completed Unit
N
N
N
N
Install
Insert
From
Back
V1.0
Advertisement
