Control Function Operation; Watercraft Control Functions; Remote Control Transmitter - Yamaha 2011 WaveRunner FZR Owner's/Operator's Manual

Control function operation

EJU31024

Watercraft control functions

EJU41370

Remote control transmitter

The Yamaha Security System and Low RPM
Mode settings can be selected by operating
the remote control transmitter. (See page 30
for Yamaha Security System setting proce-
dures and page 37 for Low RPM Mode activa-
tion procedures.)
1 Remote control transmitter
Since the watercraft is programmed to recog-
nize the internal code from this transmitter
only, the settings can only be selected with
this transmitter.
If you accidentally lose your remote control
transmitter or if it is not operating properly,
contact a Yamaha dealer.
When operating the watercraft, always keep
the transmitter with you, such as by storing it
29
in the transmitter holder in the beverage hold-
er, so that it is not lost.
1
1 Transmitter holder
ECJ00752
NOTICE
The remote control transmitter is not
G
completely waterproof. Do not sub-
merge the transmitter or operate it un-
derwater. If
submerged, dry it with a soft, dry cloth,
and then check that it is operating prop-
erly. If the transmitter is not operating
properly, contact a Yamaha dealer.
Keep the remote control transmitter
G
away from high temperatures and do not
place it in direct sunlight.
Do not drop the remote control transmit-
G
ter, subject it to strong shocks, or place
any heavy items on it.
Use a soft, dry cloth to clean the remote
G
control transmitter. Do not use deter-
gent, alcohol, or other chemicals.
Do not attempt to disassemble the re-
G
mote control transmitter yourself. Other-
wise, the transmitter may not operate
properly. If the transmitter needs a new
battery, contact a Yamaha dealer. Refer
to local hazardous waste regulations
when disposing of transmitter batteries.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
the transmitter is