Table of Contents
Advertisement
Wiring (continued)
Using the wire connectors from the
remote control hardware bag:
•
Connect the white wire from the
receiver (marked "common out")
to the white wire from fan.
•
Connect the black wire from the
receiver (marked "fan out") to
the black wire from the fan.
•
Connect the blue wire from the
receiver (marked "light out") to
the blue wire from the fan.
The red wire from the receiver will
not be used, it has a pre-installed
wire terminator.
Refer to CAUTION c.1 on pg. 2
Using an orange wire connector from
the
•
•
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
11
M6010-01 • 10/30/14 • © Casablanca Fan Company
www.CasablancaFanCo.com
hardware bag:
Connect the black wire
(ungrounded) from the ceiling to
the black wire from the receiver
(marked "live in").
Connect the white wire (grounded)
from the ceiling to the white wire
from the receiver (marked "neutral
in" or "common in").
the outlet box and the ungrounded wires on the other side of the outlet box.
1.888.227.2178
Advertisement
Table of Contents
