Dell SE2717H/HX
If VGA or HDMI cable is not connected, a floating dialog box as shown below appears.
The monitor will enter Power Save Mode after 4 minutes if left at this state.
Dell SE2717H/HX
Dell SE2717H/HX
See
Troubleshooting
?
No VGA signal from your device.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
?
No VGA Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
No HDMI Cable
?
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
for more information.
or
Operating your monitor
35
|