Keyboard Cover - HP Compaq Presario CQ61 Maintenance And Service Manual

Removal and replacement procedures

Keyboard cover

Description
For use with the CQ61 and black HP G61
For use with the silver HP G61
Before removing the keyboard cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Wireless module compartment cover (see
b. Hard drive cover (see
c. Optical drive (see
d. Keyboard (see
Remove the keyboard cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the six Phillips PM2.5×6.5 screws 1 and the five Phillips PM2.0×3.0 screws 2 that secure the
keyboard cover to the base enclosure. The keyboard cover screws are identified by a triangle icon embossed on
the base enclosure.
4–18
Downloaded from LpManual.com Manuals
"Battery" on page 4-7).
"Hard drive" on page
"Optical drive" on page
"Keyboard" on page 4-16).
"WLAN module" on page
4-10). HP recommends removing the hard drive.
4-15), recommended.
Spare part number
531207-001
534997-001
4-8).
Maintenance and Service Guide