Using The Child Lock - Objecto T3 User Manual

To change the time on the timer
Press the OFF-timer button
shutdown timer setting is shown.

Using the Child Lock

This function prevents children from accidentally changing the settings.
1. While the heater is operating, press and hold the child lock button
(5 seconds or more).
• The heater will beep and the child lock indicator will light to show the child lock is activated.
• Once locked, the settings cannot be changed even if the buttons are pressed.
• However, if the power is turned off, the child lock function is canceled. So, if the heater is
knocked over and the power is turned off by the tip over switch, the child lock is canceled.
2. To cancel the child lock, press and hold the child lock button
(5 seconds or more) again.
The heater will beep and the child lock indicator will turn off to show the child lock
is canceled.
* The child lock function cannot be set or canceled via the remote.
Child lock indicator lamp
Child lock button
(remote control
10
English
) until the desired