Check The Usb Memory Information; Removing Usb Memory - Triumph Adler 350ci Operation Manual

Operation on the Machine > Operating using Removable USB Memory
3

Check the USB Memory Information

You can check the USB memory information.
1
2

Removing USB Memory

Follow the steps below to remove the USB memory.
IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB memory.
1
2
Store the document.
1
Select the folder where the file will be stored > [Open].
The machine will display the top 3 folder levels, including the root folder.
2
Select [Store File].
3
Set the type of original, file format, etc., as desired.
For the features that can be set, refer to the following:
Removable Memory (Store File, Printing Documents) (page 6-11)
4
Check the storing image.
5
Press the [Start] key.
The original is scanned and the data is stored in the USB memory.
In the removable memory screen, select [Memory Information].
Once you confirm the information, select [Close].
Display the screen.
[Home] key > [Remove Memory]
Select [Remove Memory].
Select [OK], and remove the USB memory after "Removable Memory can be safely removed."
is displayed.
NOTE
USB memory can also be removed after checking the status of the device.
Device/Communication (page 7-13)
5-66