Ir Module Setup; Camera Module Setup Via Osd Menu - Santec VDC-727IR-WM User Manual

Bedienungsanleitung / User manual
VDC-727IR-WM, VDC-727IR-WBJB

3.7.5 IR module setup

IR MODULE SETUP
1 CONTROL
2 IR SW DELAY
Here you can define the delay for day/night switching.
Control on: Black/white picture (night mode); the IR illuminator is always running.
Control off: Colour picture (day mode); the IR illuminator is always switched off.
Control auto: Automatic day/night switching. In darkness, the IR illuminator is automatically
switched on.
4. Camera module setting via OSD menu
Use the joystick to select the function „Camera options" and confirm your choice by entering
„PRESET 95" or by pressing „IRIS OPEN". The OSD of the camera module can alternatively
be called-up entering "PRESET 57" on the keyboard.
The following menu appears:
SSDR 
WHITE BAL
BACKLIGHT
MOTION DET 
FOCUS 
EXPOSURE 
SPECIAL 
RESET
EXIT
Use the joystick to select the desired function.
Move the joystick right to select the respective options.
Options marked with a  are selected by moving the joystick right and confirmed by
pressing „IRIS OPEN".
_________________________________________________________________________________
ON/OFF/AUTO
10 sec.
MAIN SETUP
ON/OFF
ATW/MANUAL/AWC-SET/OUTDOOR/INDOOR
OFF/BLC/HLC
- 81 -