Pioneer DVR-550H-S Operating Instructions Manual page 53

• DVD-R DL (Video mode) discs and
DVD+R DL discs must be finalized in
order to play in other recorders/players.
Note however that some recorders/
players will not play even finalized dual-
.book 59 ページ ２００６年１２月２８日 木曜日 午後４時２１分
layer discs.
1 Load the disc you want to finalize.
Make sure that the recorder is stopped
before proceeding.
HOME MENU
2
Home Menu.
If two programmes have the
mes (but different channels, for
ENTER
), the programme set most
3
takes priority.
'Next Screen'.
年１２月２８日 木曜日 午後４時２１分
DC is active for two timer
Disc Setup
mes that are programmed to
Basic
he same time, then the
Initialize
Finalize
me that actually starts first Finalize
Optimize HDD
ority.
neous recording and
• You can move the cursor forward or back
k (Chase Play)
an hour at a time using the
ENTER
buttons.
4
and DVD+R/+RW discs only, select a title
午後４時２１分
allows you to watch a recording
menu style, then select 'Yes' to start
progress from the start, without
then
finalization or 'No' to cancel.
E
it until the recording has
u. The menu you select will be the one that
, playback is 'chasing' the
appears when the 'top menu' (or 'menu' for
a DVD+R/+RW) is selected on any DVD
/
record.
/
player.
e not just limited to watching
/
g in progress. You can watch
Finalize
e already on the HDD (or on a
e recording to the HDD) by
0
rom the Disc Navigator screen
he Pause Live TV setting (see
Each row of the grid is one day (you can set
he Disc Navigator with recordable
3) is set to TV's Tuner , you can
the timer recording for up to a month in
e HDD on page 67).
AUSE LIVE TV while the recorder
advance). Each column is a 15 minute
s not possible when DV is the
ndby to switch on and
interval.
HDD
put.
ately start recording. When set to
The darker area represents time that has
er's Tuner , it is not possible to
already passed and can't therefore be
uality.
Pause Live TV feature from
selected. The lighter area is time that's
ss during recording to start
n
.
available.
om the beginning of the
rding 06
essing PAUSE LIVE TV , it will
1
n the
ording .
east 10 seconds for the picture to Note
6
ENTER
ing.
(during this time, all controls
1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize
er
The start date and time is displayed in the
it for Video mode recording.
ess during recording to select n
he power button are inoperative).
med to
middle of the screen.
rding Downloaded From Disc-Player.com Pioneer Manuals
hat startup from standby is not
e to play.
• You can go back and reset the start time
nk DVD e if you have selected Recorder's
all the usual playback controls,
first
if you need to by pressing RETURN .
Select 'Disc Setup' from the
• To stop recording, press
(playback will continue).
• During recording or in timer recording
Select 'Finalize' > 'Finalize' >
standby, you can't play an HDD title,
DVD or Video CD/Super VCD disc if the
Input Line System setting doesn't match
the TV line system of the disc/HDD title
Finalize Next Screen
(see also Additional information about
Undo Finalize Start
the TV system settings on page 124).
Also, during simultaneous recording
and playback, if the TV line system of the
playback track/title changes then
playback will automatically stop.
Recording from an external
For DVD-R/-RW (Video mode)
component
Current time
Recording start time
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
T R
You can record from an external component,
: : : :
such as a camcorder or VCR, connected to
06
one of the recorder's external inputs.
/ :
1 Make sure that the component you
S T
want to record from is connected
P
RE MODE SP
properly to the HDD/DVD recorder.
See Chapter 2 ( Connecting up ) for
connection options.
INPUT SELECT
2
the external inputs to record from.
The current input is shown on-screen and in
the front panel display:
• AV2/L1 – Input 1
• L2 – Input 2 (front panel)
Set the start time.
• L3 – Input 3
Check that the Audio In settings for
External Audio and Bilingual Recording
are as you want them (see Audio In on
• Discs recorded partially or fully on the
Pioneer DVR-7000 DVD recorder do not
support this feature. These discs will
have only a text title menu when finalized
on this recorder.
5 The recorder will now start finalizing
the disc.
During finalization:
• If the finalization process of a DVD-RW
or DVD+R/+RW disc is going to take
more than around four minutes, you can
press ENTER to cancel. Around four
minutes before completion, the option to
cancel disappears.
• You can't cancel the finalization of a VR
mode DVD-R disc.
• How long finalization takes depends on
the type of disc, how much is recorded
on the disc and the number of titles on
the disc. A disc recorded in VR mode can
take up to one hour to finalize. DVD-R/-
06
RW (Video mode) and DVD+R/+RW
discs can take up to 20 minutes.
Initializing recordable DVD
and
discs
DVD-R DVD-RW DVD+RW DVD-RAM
DVD-R/-RW discs can be initialized for either
Video mode recording or VR mode
: :
recording.
When you first load a blank DVD-RW or
DVD+RW disc, the recorder initializes it for
:
recording automatically. By default, blank
DVD-RW discs are initialized for VR mode
HDD/DVD HDD
recording. See DVD-RW Auto Initialize on
page 62 if you want to change the default to
Video mode.
DVD-R discs are ready for Video mode
Press repeatedly to select one of
recordings out of the box; if you want to use
a DVD-R for VR mode recording, you must
initialize it before recording anything on the
disc.
2
06
STOP REC
:
1
06
En