Pioneer DVR-550H-S Operating Instructions Manual page 132

Additional
16
HDMI
Problem
The connected HDMI or
6 ページ ２００ 年１月６日 曜日 午後 時 ８分
DVI device does not
display any picture
(and the front panel
HDMI indicator does
not light)
ng and backup
cancel the backup process by
ONE TOUCH COPY for more
second.
e data has been copied, take
and load a blank* recordable
ì
k-up
tent saved to Hard Disk Drive.
ject the disc and load a
ble disc
No video from the
HDMI output
Start Cancel
a DVD-R ver. 2.0, 2.1 or 2.2 disc,
ver. 1.1 or ver. 1.2 disc for the
There's no sound from
ckup a DVD-R disc to DVD-RW,
the connected HDMI or
not undo the finalization later.
DVI device
ecordable capacity of discs vary
may be cases where the
If the unit does not operate normally due to external effects such as static electricity, disconnect
of the disc you're backing-up
the power plug from the outlet and insert again to return to normal operating conditions.
t on to a particular blank disc. If
pens, please try another brand of
If the picture freezes and the front panel and remote control
buttons stop working
RW discs can only be backed up
R/-RW discs; DVD+R/+RW
• Press
n only be backed up to DVD+R/
playback.
scs.
• Press the front panel
artÕ to start writing the
button to switch the power off, then
ata to the blank disc.
switch back on and restart playback. If
the power fails to switch off, press and
k-up
hold
ack-up data from Hard Disk Drive.
132 until the power switches off.
contents will be overwritten.
art?
En
Downloaded From Disc-Player.com Pioneer Manuals
Start Cancel
Remedy
• Try disconnecting then reconnecting the HDMI cable (while the
power of both components is on).
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next,
switch on the HDMI/DVI device and leave it for around 30 seconds,
then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the
following:
– The connected device's video input is set correctly for this unit.
are using a DVD-RW or DVD+RW disc
– The cable you're using is fully HDMI-compliant. Using a non-
you can re-initialize it in order to make it
standard cable may result in no picture being output.
usable again — see I
– Don't use several HDMI cables connected together. Use a single
DVD
cable to connect devices together.
7 • When you connect a DVI-compatible device make sure of the following: After the recorder has finished
recording the backup disc, you can select
– The connected device's video input is set correctly for this unit.
DVD-RW
whether to make another backup of the – The DVI terminal on the connected device is HDCP-compatible.
same data or exit.
– The connected device is compatible with NTSC (720 x 480i/p, 1280 x
720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i/p)
Disc Back-up
video input.
Disc back-up finished.
• If the recorder's internal HDD is damaged or broken, there will be no
To make another back-up copy, please load
HDMI output.
a recordable disc.
• Not all HDCP-compatible DVI devices will work with this recorder.
If you choose a setting that is incompatible with your TV you may not
• Select Start to make another backup
be able to see any picture at all. In this case, press
copy or Cancel to finish. If you want to
while holding down the
make another backup copy, return to
the setting (this also switches Component Video Out on page 115 to
step 6 above.
the default setting).
8 If you donÕt need to keep the backup
• There is no sound when using a DVI terminal.
data on the HDD, you can delete it now.
• Some HDMI-compatible devices do not output sound (check with
Select Yes to delete the data from the HDD;
the manual that came with the connected device).
select No to keep it (you can delete it later if
you want to).
Disc Back-up
The backed-up data is still on the HDD.
Erasing it will increase the free space
available. OK to Erase?
STOP then try restarting
• If you decide to leave the backup data on
the HDD, you can make backup copies
STANDBY/ON
to recordable DVD discs anytime from
the Disc Back-up menu.
STANDBY/ON for five seconds
on page 61.)
DVD RW,
ì,
Start Cancel
(Stop) button on the front panel to switch
Yes No
STANDBY/ON
STANDBY/ON
OPEN/CLOSE
HDD/DVD
DivX COPY
DV IN
OPEN/CLOSE
STOP REC
INPUT
CH
SELECT