Pioneer DVR-550H-S Operating Instructions Manual page 17

1
ANTENNA
IN (RF IN)
AUDIO
R
ANTENNA
IN
.book 19 ページ ２００６年１２月２８日 木曜日 午後４時２１分
OUT
Y P
COMPONENT VIDEO OUT
ANTENNA
OUT
1
3
IR transmitter end of the G-
e so that the IR receiver on your
te/digital terrestrial receiver will
control signals (see diagram).
To antenna input
年１２月２８日 木曜日 午後４時２１分
O
INPUT 3
S-VIDEO
OUTPUT
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
ual that came with your cable/
2 Connect the DIGITAL OUT COAXIAL
tal terrestrial receiver if you're
dio/
Using the S-video or component
jack on this recorder to a coaxial digital
ere the IR receiver is on the front
video output
input on your AV amplifier/receiver.
natively, experiment with the
This enables you to listen to multichannel
rol, operating it from very close
To component video input
surround sound.
ector to
ou find the place where the
re are
ponds.
3 Connect the analog AUDIO OUTPUT
午後４時２１分
s well as
and VIDEO OUTPUT jacks on this recorder
To audio input
tput.
to an analog audio and video input on
your AV amplifier/receiver.
order has a 'through' function
eo
4 Connect the AV amplifier/receiver's
lows you to record a TV AUDIO
video output to a video input on your TV.
OUTPUT
me from the built-in TV tuner in
R
ANTENNA
rder while watching a video
IN
Connecting using HDMI
on your VCR (To use this feature OUT
COMPONENT
e recorder is in standby, Power
VIDEO OUT
If you have an HDMI or DVI-equipped
ust be set to Off — see Power
page 113).
monitor or display
1 Connect the S-video or component
this recorder using an HDMI cable (not
video output to a similar input on your
ing an external supplied).
TV.
box (1)
For an S-video connection, use an S-video
AC IN
cable (not supplied) to connect the S-VIDEO
n external, dedicated decoder
Note
OUTPUT jack to an S-video input on your TV.
satellite or cable TV system, use
1 Depending on the component you have connected, using a DVI connection may result in unreliable signal
ack to a
For a component video connection, use a
scribed on this page. See above transfers.
component video cable (not supplied) to
2 The pixel resolution of this recorder's HDMI video output is (according to TV format): NTSC (720 x 480i/p, 1280
onnect the G-LINK™ cable.
audio/
connect the COMPONENT VIDEO OUT
x 720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i/p). If your display is not compatible with
. these resolutions the picture may not be correctly reproduced.
jacks to a component video input on your TV.
ortant
Downloaded From Disc-Player.com Pioneer Manuals
acks to
See also Component Video Out on page 115
onnect your decoder box directly
n your
for how to set up the component video
Antenna/cable TV
wall outlet
VIDEO
L
DIGITAL
INPUT 3 AUDIO OUT
S-VIDEO
AV 2 (INPUT 1/DECODER)
HDMI OUT COAXIAL
G-LINK
IN
CONTROL
B P R
AV 1 (RGB) – TV
OUTPUT
AUDIO/VIDEO
OUTPUT
To audio/video input
AV amp/
• It is not possible to watch one TV
receiver
programme and record another using
this setup.
Antenna/cable TV
wall outlet
AV 2 (INPUT 1/DECODER)
G-LINK IN
TV
CONTROL
AV 1 (RGB) – TV
From SCART AV
connector
ANTENNA
OUT
2
TV
S-VIDEO
02
OUTPUT
AUDIO VIDEO
L
DIGITAL
INPUT 3 AUDIO OUT
S-VIDEO
AV 2 (INPUT 1/DECODER)
HDMI OUT
G-LINK IN
Y P P CONTROL
B R
AV 1 (RGB) – TV
COMPONENT VIDEO OUT OUTPUT
1 Connect the cable from the antenna/
cable TV outlet to the antenna input on
2
your VCR/satellite receiver/cable box.
, you can connect it to
2 Use a SCART cable (not supplied) to
connect your decoder to your VCR/
satellite receiver/cable box.
See the manual for your decoder box for
more detailed instructions.
3 Use a SCART cable to connect your
VCR/satellite receiver/cable box to the
AV2 (INPUT 1/DECODER) AV connector
on this recorder.
4 Use a SCART cable to connect the AV1
(RGB)-TV AV connector to your TV.
The HDMI connector outputs
uncompressed digital video, as well as
almost every kind of digital audio.
1 Use an HDMI cable to connect the
HDMI OUT connector on this recorder to
AC IN
an HDMI connector on an HDMI-compat-
DIGITAL
ible monitor.
AUDIO OUT
2
To digital input
From video
output
4
To video input
SCART AV
1
R
ANTENNA
connection
IN
2
OUT
To antenna input
Y
COMPONENT VIDEO OUT
VCR/Satellite receiver Decoder
02
/Cable box
3
• The arrow on the cable connector body
AV2 (INPUT 1/
should be face down for correct
DECODER)
alignment with the connector on the
AUDIO VIDEO
R L
INPUT 3
IN
S-VIDEO
recorder.
AV 2 (INPUT 1/DECODER)
G-LINK IN
CONTROL
Y P B P
R AV 1 (RGB) – TV
COMPONENT VIDEO OUT OUTPUT
When connected to an HDMI component or
AV1 (RGB) - TV
HDCP-compatible DVI component, the
HDMI indicator lights.
To video input
HDMI setup is generally automatic. There
1
are however settings you can change if you
need to. See HDMI Output (only available
when an HDMI device is connected) on
page 121 for more information. Note that the
AC IN
HDMI settings remain in effect until you
COAXIAL
TV
change them, or connect a new HDMI
component.
1
02
To HDMI
input
HDMI-compatible display
HDMI
OUT
AUDIO VIDEO
L
INPUT 3
S-VIDEO
AV 2 (INPUT 1/DECODER)
G-LINK IN
CONTROL
P B P
R AV 1 (RGB) – TV
OUTPUT
DIGITAL
AUDIO OUT
AC IN
COAXIAL
HDMI OUT
4
To SCART AV
connector
02
DIGITAL
AUDIO OUT
AC IN
HDMI OUT COAXIAL
En