LG LTNS16121V /00 Service Manual page 13

9. Disconnect the power source of the motor.
10. Remove the motor from the tray using a screwdriver.
11. Remove it carefully for avoid the pipes to colapse.
12. Lift the condenser and place carefully the new tray.
9
11
NOTE: For assembly the new tray, follow follow in reverse
the above steps.
For removing or replacing the motor
1. Disconnect the power source.
2. Remove the screw from the guide fan.
3. Remove the guide fan (release the locks placed on its bottom
side).
4. Remove the fan.
1
3
5. Quite los tornillos que sujetan al motor.
6. Retire el motor y reemplacelo.
5
NOTE: For assembly the motor, follow follow in reverse
the above steps.
10
12
2
4
6
13
For removing or replacing the fan motor
1. Disconnect the power source.
2. Remove the screw from the guide fan.
3. Remove the guide fan (release the locks placed on its bottom
side).
4.Remove the fan.
1
3
NOTE: For assembly the new tray, follow follow in reverse
the above steps.
1
2
4