(5)
When your transmission is completed, release the button on the microphone and you will hear your party's
voice. When receiving a weak station, rotate the Squelch Control slightly back for the strongest signal.
(6)
If the receiving frequency causes a drift when you are listening, retune the receiver by setting the Delta Tune
Switch to either "+" or "—" position, whichever tunes the receiver in the incoming frequency.
Note: * ANL OFF position is for operation in low noise area.
* If a larger audio output power is desired, connect an external speaker (8
ci)
to the EXT SP Jack.
PUBLIC
—
ADDRESS OPERATION
Your transceiver is provided with a built-in public-address amplifier so that it can be used as a public-address system.
Connect your existing PA speaker (8
ci)
to the PA SP Jack and set the CB/PA Switch to the PA position.
TECHNICAL PERFORMANCE
Dimensions and Weight:
26.965 — 27.255MHz, 23 channels
A3
600 ohms
12V negative or positive ground (Polarity Protector contained in unit)
Receive
approx. 200mA (squelch ON)
Transmit
approx. 1500mA (maximum mod.)
a.
Ambient temperature: —10°C — +50°C
b.
Relative humidity:
+40°C 95% or less
c.
Power Variation:
11V — 15V
a.
Dimensions:
165(W) X 55(H) X 200(D)mm
b.
Weight:
approx.1.5kg
GENERAL
Frequency Range:
Type of Emission:
Microphone:
Power Supply:
Power Consumption:
Operating Condition: