Using Your Whisk - Sunbeam Zumbo Instruction Booklet

Using your StickMaster whisk
Using the whisk attachment
1. Insert the whisk attachment onto the motor
base and rotate in a clockwise position
until the two pieces are locked together.
See Figure 5.
Figure 5
2. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
3. Holding the stick mixer, lower the whisk
into food and depress the power button at
the top of the motor housing. Select from
speed 1 through to 9 and depress the
power button (
the top of the motor housing.
6
) or setting ( ) at
Note: All stick mixers are designed to
operate only whilst the power buttons remain
depressed.
Note: The power button (
released when selecting the turbo speed
button ( ).
5. To stop the StickMaster
off the power button or the turbo speed
button.
6. To detach the whisk attachment, rotate the
attachment in an anti clockwise position
until the attachment unscrews from the
motor base.
) should be
, take your finger
®
Figure 6