Advertisement
Using your processing bowl continued
Using the processing bowl attachment with the
slicing/shredding disc
1. Place the processing bowl on the non-slip
mat, ensuring the surface is clean and
level.
2. Place food into the processing bowl.
3. Fit the shredding/slicing disc with the
spindle into the processing bowl.
4. Attach the lid onto the processing bowl and
rotate the lid in a clockwise direction until
it locks into position.
5. Insert the motor housing into the
processing bowl lid and twist the wand in
a clockwise position until you hear a click.
See Figure 13.
6. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
Figure 13
7. Remove the food pusher and place
ingredients into the feed tube. Using the
food pusher guide food down the feed tube
evenly, while operating the power button
with the other hand.
10
8. Select from speed 1 through to 9 (on
StickMaster
Platinum model) and depress
®
the power button (
button (
) at the top of the motor
housing.
Note: All stick blenders are designed to
operate only whilst the power buttons
remain depressed.
Note: The power button (
released when selecting the turbo speed
button
(
).
9. To stop the stick blender, take your finger
off the power button or turbo speed
button.
10. To detach the motor body, twist the shaft
in an anti clockwise position until the
motor body unscrews from the processing
bowl. See Figure 14.
Note: Discolouring of the interior of the chute
can occur overtime, with heavily coloured
foods such as carrots or berries.
) or turbo speed
) should be
Figure 14
Advertisement
