Palsonic 6140GY Owner's Manual page 18

Operations
Channel selection
Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit
1 3
2
4 6
5
9
7
8
0
CH
VOL VOL
CH
SLEEP
PIC
EDIT
SOUND
GAME
SYSTEM
You can press DSP button
twice to display the current
time of the TV set, press
again to cancel.
(continued)
Use Channel up/down buttons
1 Press CH+ button, the channel number increases.
2
Press CH- button, the channel number decreases.
Use Previous channel button
Press button to switch between the current channel and the
previous channel.
For example, the channel you previously watched is 11, the
current channel is 2, press the button, it will return to channel 11,
3
press the button again it will return to channel 2.
Channel scan
Press SCAN button, the set will
scan the channel from the
current channel to higher
channels one by one until all the
programs are scanned over and
then stop. During scanning,
pressing any button will stop it
and the screen will settle at the
current scanned program.
Channel edit
1 Press EDIT button to display
CHANNEL EXCHANGE
menu.
2 Press CH+/- to select
CHANNEL 1, use VOL+/- to
set the number which you
want to swap, for example,
channel 6.
3 Press CH+/- to select
CHANNEL 2, use VOL+/- to
set the number which you
want to swap to, for example,
channel 10.
4
Press CH- to select EXCHANGE, press VOL+ or VOL- and
the channel 6 and 10 are swapped.
Repeat the above steps to edit the programs in your favourite
order.
16
2
CHANNEL SCANNING
CHANNEL EXCHANGE
CHANNEL 1 6
10
CHANNEL 2
EXCHANGE
SELECT ADJUST