Picture Mode Selection; Other Functions - Palsonic 6158 Owner's Manual

Picture mode selection

You can select the picture quality instantly among three presets modes and one user-set mode.
Press the button to select the desired picture quality. DYNAMIC, STANDARD, MILD and
MEMORY (user-set) can be selected cyclically.
MEMORY
Item
Output
Brightness
Mode
DYNAMIC
STANDARD
MILD
MEMORY

Other functions

1. Retain on-screen display
+
Press the button and the upper right corner will display the current channel number and TV
system. After 4 seconds the display on the screen will disappear.
+
Press
In VIDEO mode, it will only display VIDEO l (or VIDEO 2) and the colour system.
2. TV colour system selection
Press the STD button and each time the colour system displayed on the screen will change in the
sequence of
AUTO
If the system is not set correctly, the picture will have no colour or the colour is abnormal.
Press STD button to select the right colour system to obtain normal colour. (Refer to the
following table).
DYNAMIC
Colour
31 31
31 31
31 31
The picture quality you set
2
AUTO
After 4
SYS 1
seconds
PAL
STANDARD
Contrast Tint
47 31
31 31
21 31
N358 N443
13
MILD
Sharpness
31
31
31