CITROËN C3 PICASSO Handbook page 35

Vehicle configuration
Once the "Veh config" menu has been
selected, you can activate or deactivate the
following equipment:
- wiper linked with reverse gear (see the
"Visibility" section),
- guide-me-home lighting (see the "Visibility"
section),
- daytime running lamps (see the "Visibility"
section).
Using this menu, you can also reinitialise the
tyre under-inflation detection system (see the
"Safety" section).
Options
Once the "Options" menu has been selected,
you can start diagnostics of the status of the
equipment (active, not active, faulty).
Language
Once the "Languages" menu has been
selected, you can change the language used
by the display by selecting a new language
from the list offered.
The chosen language will also be used
by the eMyWay system colour screen.
Multifunction screens
Units
Once the "Units" menu has been selected,
you can change the units of the following
parameters:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
Once the fuel consumption unit has
been changed to mpg, the information
relating to speed and distance also
changes to miles.
For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.
2
33