Selecting Channel/Input Signal; Selecting Channel; Selecting External Input Signal - Palsonic 3435TS Owner's Manual

Operations

Selecting Channel/input signal

Selecting channel

1
Use Digit buttons
To select one-digit channel
Press --/-- button to
display "-".
To select two-digit channel
Press --/-- button
repeatedly to
display "--".
To select three-digit channel
Press --/-- button
repeatedly to
display "1--"
Note: The maximum channel number is 199, the set does not act if the
channel number you input is out of the range of 0~199.
2
Use CH+/- buttons
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
3
Use previous channel
Press button to switch between the current channel and previous channel.
4
Use TYPE and SELECT buttons
Press TYPE button to select the program type group that you want to watch.
Press SELECT button repeatedly, and the program is switched among the type group.
Selecting the external Input Signal
1
Press AV button repeatedly, the screen displays input signal source AV1 or AV2.
Select the input signal source you need.
2
To return to TV mode, you can press AV button or 0-9 buttons.
-
Press 0-9 direct
channel selector.
--
Press 1-9 buttons.
1- -
Press 0-9 buttons.
button
16
1-
Press 0-9 buttons.
1- -
Press 0-9 buttons.
8
18
168