Advertisement
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the frame guide. Make sure that the storage
latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85¡ Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the stor-
age latch is closed fully over the frame guide.
1. Hold the upper ends of the handrails. Place one foot on
the leg as shown.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back, or the leg
pads may come off. To reduce the risk of injury, use
extreme caution whilst moving the treadmill. Do not
attempt to move the treadmill over an uneven surface.
3. Place one foot on the leg, and carefully lower the treadmill
until it is resting in the storage position.
10
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
Your treadmill features a walking belt coated with PERFORMANT LUBE
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will
deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-earthing conductor and a earth-
ing plug. Plug one end of the cord into the treadmill. Plug the
power cord into an appropriate outlet that is properly in-
stalled and earthed in accordance with all local codes and
ordinances.
Storage
Latch
Closed
Frame
Guide
Leg
Front Wheels
TM
WALKING BELT
DANGER:
Improper connection of the
equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a quali-
fied electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not
modify the plug provided with the productÑif it will
not fit the outlet, have a proper outlet installed by a
qualified electrician.
TM
, a high-performance lubricant. IMPOR-
7
Advertisement
