Bosch sensixx'x DI90 Operating Instructions Manual

Bosch sensixx'x DI90 Operating Instructions Manual

Motor-steam

Advertisement

Register your new Bosch now:
http://www.bosch-home.co.uk
Sensixx'x DI90
Motor-Steam
en Operating instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the sensixx'x DI90 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bosch sensixx'x DI90

  • Page 1 Register your new Bosch now: http://www.bosch-home.co.uk Sensixx’x DI90 Motor-Steam en Operating instructions...
  • Page 3: Table Of Contents

    Index General safety instructions Description Before using your appliance for the first time Using your appliance 1. Filling the water tank 2. “SensorSteam” function 3. Setting the temperature 4. Setting the steam amount 5. Ironing with steam 6. Shot of steam 7.
  • Page 4: General Safety Instructions

    EN • Operating instructions Thank you for buying the DI90 compact steam generator from Bosch. Carefully read through the operating instructions for the appliance and safeguard them for future reference. You can download this manual from the local homepages of Bosch.
  • Page 5: Advice On Disposal

    Important notices • In special environmental conditions slight instability may occur. • This appliance has been designed • The appliance must never be placed exclusively for domestic use and must not directly under the tap to fill the water tank. be used for industrial purposes.
  • Page 6 * Model dependent B O SC H...
  • Page 7: Description

    This appliance has been designed to use 21. “StoreProtect” accessory* normal tap water. • The addition of other liquids, (unless recommended by Bosch) such as perfume, will damage the appliance. • Do not use condensation water from tumble dryers, air conditioning systems or similar.
  • Page 8: Sensorsteam" Function

    1. Open the water inlet lid (9). 2. “SensorSteam” function 2. Fill the water tank. Never fill beyond the level mark for maximum filling (12). The “SensorSteam” function makes the iron heat up only when the handle is gripped, and stop heating when the handle is no longer gripped.
  • Page 9: Setting The Temperature

    3. If the iron handle is released for more 3. Setting the temperature than 10 seconds, the iron will stop heating automatically. 4. When the handle is gripped again, the The temperature control (15) adjusts the iron heating up and continuous steam temperature of the soleplate (13).
  • Page 10 3.1 “TempOK” indicator While the soleplate is heating up or cooling down to the selected temperature, the “TempOK” lights inside the temperature control (15) will flash. When the selected temperature is reached, the lights will stop flashing and remain lit continuously. 3.3 “AntiShine”...
  • Page 11: Setting The Steam Amount

    4. Setting the steam amount 5. Ironing with steam The steam control is used to adjust the Steam can be generated by gripping the amount of steam produced when handle (1), or by pressing the steam ironing. activation button (2*). Your iron is equipped with a steam setting selection button (4) and with indicator lamps (5) showing the steam setting, according to...
  • Page 12: Shot Of Steam

    Steam on demand * 2. Press the shot of steam button (7) on the handle repeatedly at intervals of 5 1. Set the steam control to the position, seconds. to cancel continuous steam generation while gripping the handle (1). 5´´ 2.
  • Page 13: Ironing Without Steam

    2. Hang article of clothing on a clothes 2. Select an appropriate temperature for the hanger. type of material being ironed (see “Setting the temperature” section). 3. Operate the iron in a vertical position at a distance of 10 cm / 4 in, and press the shot of steam button (7) repeatedly with pauses of at least 5 seconds.
  • Page 14: Spray

    10. Spray 11. After ironing This can be used to remove stubborn 1. Unplug the iron from the mains socket. wrinkles. When ironing, press the spray button (6) and water will spray out of the spray nozzle (10) onto the garment. 2.
  • Page 15: Tips To Help You Save Energy

    6. Set the temperature control (15) to “•”. Cleaning & Maintenance 7. Coil the power cable (18) loosely around the heel of the iron, before storing. Store the iron in an upright position. Attention ! Risk of burns ! Always unplug the appliance from the mains supply before carrying out any cleaning or maintenance operation on it.
  • Page 16: Multiple Descaling System

    2 Set the temperature selector (15) to the Multiple descaling system “max” position and plug in the iron. AntiCalc A. self-clean D. anti-calc B. Calc'nClean 3 After the necessary warm-up period, the “TempOK” lights inside the temperature control stop flashing. Then, unplug the iron (very important!).
  • Page 17 “Calc’nClean” with descaling liquid * For deep descaling, it is recommended to use the descaling liquid especially developed by Bosch. This procedure should be carried out every 3 months. 1. Unplug the iron from the mains socket. 2. Fill the water tank with tap water mixed with a measure (25 ml) of the descaling fluid (19*).
  • Page 18: Textileprotect" Soleplate Cover

    “TextileProtect” Guarantee conditions soleplate cover * TextileProtect The terms of the guarantee for this The “TextileProtect” soleplate cover appliance are in accordance with that stated (20*) is used for steam-ironing delicate garments at maximum temperature by our representative for the country in which it is sold.
  • Page 19: Trouble Shooting

    Trouble shooting Problem Probable cause Solution The iron does not 1. Temperature control (15) set 1. Turn to a higher position. heat up. to minimum. 2. The “SensorSteam” system 2. Grip the handle (1) of the iron has been activated. The iron is to re-start it.
  • Page 20 Customer Service Great Britain Bosch Customer Service UK +44 (0)344 892 8979 Grand Union House IRL +353 (0)1450 2655 Old Wolverton Road Milton Keynes www.bosch-home.co.uk MK12 5PT 002 Sensixx’x DI90 GB 10/14...

Table of Contents

Save PDF