Huawei eSpace 6805 Administrator's Manual page 15

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Field
Upgrade Via
Firmware
Server Path
Config Server
Path
Firmware File
Prefix
Firmware File
Postfix
Config File
Prefix
Config File
Postfix
Allow DHCP
Option 43 and
Option 66 to
override server
Disable DHCP
Option248
Automatic
Upgrade
Authenticate
Conf File
Enable TR-069
ACS URL
Issue 01 (2012-06-20)
Description
Mode of upgrading the firmware or configuration file. The options are
TFTP, HTTP, and HTTPS. The default value is HTTP.
IP address or domain name of the firmware server.
IP address or domain name of the configuration server.
By default, this parameter is left blank. If the parameter is set, the phone
requests the firmware file with the prefix to be upgraded. This setting is
useful for ITSPs. Users must keep it blank.
By default, this parameter is left blank. Users must keep it blank.
By default, this parameter is left blank. Users must keep it blank.
By default, this parameter is left blank. Users must keep it blank.
The default value is Yes. If the parameter is set to Yes, the phone is
allowed to obtain the firmware upgrade server address when obtaining an
IP address through the DHCP server. The configuration is performed on
the DHCP server. The obtained firmware upgrade server address
overwrites the value of Firmware Server Path. The automatic
deployment is complete.
The default value is No. If the parameter is set to Yes, the DHCP
Option248 function is disabled. If this happens, the unified upgrade and
centralized configuration are supported.
This function is for the ITSP. The default value is Yes.
 If the parameter is set to Yes, the automatic upgrade and configuration
function is enabled. Enter the interval for checking the software
upgrade or configuration changes.

When the parameter is set to No, the phone only performs HTTP
upgrade and configuration check once at boot up.
If No is selected, the configuration file is authenticated before it is
applied to the phone for ITSP.
 If this parameter is set to Yes, the phone will send session connection
requests to the ACS. To enable TR-069, you must enable the ACS.
For details on how to enable the ACS, see the ACS configuration
guide.
 If this parameter is set to No, the phone will not send session
connection requests to the ACS.
ACS URL. The URL can be in either of the following formats:

http://IP address:9090
For example, http://10.10.10.1:9090.
 http://domain name:9090
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Configuration and Loading Files
10