Replacing/Repairing; Drive Belts - Walker MS Operator's Manual

Maintenance Instructions

REPLACING/REPAIRING

To prevent accidental starting of the en-
gine when replacing parts or repairing the
machine, remove the key from the ignition
switch and disconnect the spark plug
wire.
IMPORTANT: ALWAYS use genuine factory re-
placement parts. Substitute parts CAN result in
product malfunction and possible injury to the op-
erator and/or others.
Ground Drive Belt
DANGER
PTO Drive Belt

Drive Belts

There are three (3) individual belts on the ma-
chine:
•
Engine Belt
•
PTO Drive Belt
•
Ground Drive Belt
The belts may be removed and replaced using the
procedures described on the following pages.
Belt Locations
REPLACING/REPAIRING
Engine Belt
61