Safety Warnings - Tinkerine Studio Ditto Pro User Manual

Safety Warnings

FRAGILE
The Ditto™Pro contains delicate electronic components and sensors. Handle with care.
The Ditto™Pro 3D printer is not user serviceable.
HOT SURFACE
The Ditto™Pro 3D printer hotend heats up to high temperatures during operation.
Allow the hotend to properly cool down before reaching in your hand.
MOVING PARTS
The Ditto™Pro 3D printer contains multiple moving parts that can cause injuries.
Do not reach inside the Ditto™Pro 3D printer during operation.
SHOCK
There is a risk of shock. Contact a certi ed technician to service your Ditto™Pro 3D printer.
In case of emergency disconnect the power cable from the socket.
VENTILATION
The Ditto™Pro 3D printer prints with molten plastic which emits a slight odor
during operation. Setup the Ditto™Pro 3D printer in a well-ventilated environment.
BRIGHT LIGHTS
Do not look directly at any operating LED's.
Hot Surface.
Allow to cool before servicing.
Pinch Point.
Keep hands and fingers clear.
Electric Shock Hazard.
This equipment is to be serviced
by trained personnel only.
2