Specifications - Brawn BGMF33 Operation And Maintenance Manual

th
3389 ~ 128 Avenue Holland, MI 49424

SPECIFICATIONS

Your BRAWN Mixer has been furnished with either a
standard, seven-ring, stuffing box (see Figure 1), or a
low-pressure, two-ring, stuffing box (see Figure 2),
depending on the application requirements. Unless
otherwise specified, the packing material will be one of
those shown in Figure 3. Refer to the mixer specification
sheet to ascertain the type of stuffing box and packing
material that have been supplied with your mixer.
FIGURE 1: Two-Ring Stuffing Box
FIGURE 2: Seven-Ring Stuffing Box
Copyright 2015 BRAWN Mixer, Inc.
BGMFSB-S
ERIES
www.BRAWNMIXER.com
O & M
PERATION
Phone: 616/399-5600 Fax 616/399-3084
Packing
I.D.
1345 An interlace braided
packing, made from a
special polyimide yarn that
resists abrasion, yet does
not score the shaft. A high
tensile-strength packing
with resiliency for use in
pumps, mixers and valves.
C1045 An interlace braided PTFE
multi-filament yarn,
impregnated with PTFE
dispersion to produce a
high-density, resilient
packing to handle acids,
solvents, corrosives and
other severe services in
pumps, mixers and valves.
C1065 A special PTFE packing
with 50% entrapped ultra-
fine graphite and a special
lubricant to produce a
dense, resilient packing
that dissipates heat. For
use in high-speed rotating
equipment and valves.
FIGURE 3: Packing Specifications
8/6/2015
M
AINTENANCE
Description Max.
Temp.
550° F
500° F
500° F
ANUAL
pH
Range
0-12
0-14
0-14
Page 8 of 11