Advertisement
4. Operation
Log on remote control to
Mist Generator :
0
A
Assignment of buttons :
14
The remote control must be logged on to the Mist Generator
when using for the first time.
The battery must be inserted in the remote control
(see 3. Initial Operation " Insert battery in remote control" ).
0
1. Pull out antenna
2. Insert power plug of transformer in a 230 V mains socket.
The LEDs on the Mist Generator flash for 20 seconds.
3. Press any button on the remote control within 20 seconds.
The LEDs light up continuously; the remote control is now
logged on to the Mist Generator . The button functions of
the remote control are not available until 20 seconds later.
Should logon fail, remove the power plug and try to log on again.
On / Off button (on / off) :
Pressing the On / Off button switches the Mist Generator on and
off.
Sensor button
:
The Mist Generator is equipped with a dusk sensor that switches
the LEDs on automatically when it is getting dark.
Activate dusk sensor
v Press Sensor button
Green LEDs flash for 3 seconds. Sensor is activated. Buttons
and
only function when it is getting dark.
Deactivate dusk sensor
v Press Sensor button
Red LEDs flash for 3 seconds. Sensor is deactivated.
Buttons
and
Lighting button
Pressing the Lighting button allows the lighting of the Mist
Generator to be switched on and off depending on activation of
the dusk sensor. The lighting can only be switched on when the
Mist Generator is switched on.
Light mode button (mode) :
The Mist Generator has 5 different light modes. The Light mode
button can be used to switch through them one by one.
− green LEDs light up
− red
LEDs light up
− blue
LEDs light up
− white LEDs light up
− colour change (colour changes every 5 seconds)
A
of remote control
.
:
.
:
.
function both day and night.
:
Advertisement
