Husqvarna 128DJX Operator's Manual page 25

These attachments used in combination with the specified powerhead have been evaluated
to ANSI B175.3- -2003, "Grass Trimmers and Brushcutters - - Safety Requirements". These
combinations have been evaluated by Underwriter's Laboratories Inc. (UL) and are conse-
quently UL listed:
Model 128DJX (M10 LH arbor shaft thread) - - Centre hole in blades/cutters, ∅ 25,4 mm
Approved accessories
Grass blade/grass cutter
Trimmer head
Plastic blades
Support cup
Trimmer attachment
Trimmer head
*For use only with trimmer attachment, part no. 537 35 35- -01
The accessories used in combination with the specified powerheads have been evaluated
to applicable ISO- - and EN safety requirement standards by the Swedish Machinery Test-
ing Institute:
Attachments
Cultivator attachment with shaft
Edger attachment with shaft
Blower attachment with shaft
Pruner attachment with shaft
Clean sweep attachment with shaft
Hedge trimmer attachment with shaft
577387001 Rev. 2 1/6/11
TECHNICAL DATA
Type Cutting attachment / guard, part. no.
Grass 255- -4 1 inch 504 00 13- -03 / 545 03 09- -01
(∅ 250 4- -teeth)
T25 537 33 83- -06 / 545 03 09- -01
Tricut 300 mm 531 00 38- -11 / 545 03 09- -01
Fixed - -
- - 537 35 35- -01
T35* 537 18 54- -05 / 503 97 71- -01
Part. no.
952 711 907 / 537 42 54- -01
952 711 908 / 537 19 69- -01
952 711 911
952 711 916 / 537 18 33- -16
537 19 67- -01
537 19 66- -05 / 537 19 66- -06
English--- 25