Configuration; Electrical Data - Carrier 38LF048 Installation, Start-Up And Service Instructions Manual

Configuration

Unit is shipped from factory in vertical discharge configuration as standard. However, converting to horizontal
discharge as shown is simply effected without extra fittings or metal sheet work.
To modify into horizontal discharge mode :
1. Ensure all electrical supply to the unit is disconnected and then loosen top and fan discharge
panels by removing screws.
Release wires tie on fan motor wires in control box and ease wires out of hole for extra length for
2.
interchanging panels.
Assemble top panel on front of unit and secure with screws.
3.
Final assembles fan discharge panel. Pull fans motor wires taut and retie extra length in control
4.
box.
Check fan for free rotation and observe that wiring has not been damaged or improperly strained.
5.

Electrical Data

Unit Model Power Supply
38LF048 380V/3Ph/50Hz
38LF060 380V/3Ph/50Hz
38LF007 380V/3Ph/50Hz
38LF009 380V/3Ph/50Hz
38LF012 380V/3Ph/50Hz
38LF015 380V/3Ph/50Hz
Voltage Range Compressor
Min Max RLA
342 415 7.4
342 415 8.9
342 415 10.9
342 415 16.0
342 415 17.7
342 415 26.5
- 5 -
Fan Motor
LRA QTY RLA
52.0 1 1.49
74.0 1 1.49
101.0 1 2.00
118.0 1 2.00
118.0 1 3.92
174.0 1 3.92
Recommended
Power Ground Wire
Field CB (AT)
Wire(mm.2) (mm.2)
4 2.5 20
4 2.5 20
6 4 25
6 4 30
10 4 40
16 4 50