Back Connections; Connecting Hdmi Or Dvi Devices - Toshiba 24L365 Series Owner's Manual

Back connections

Connection example
•

Before connecting any external equipment, turn
off all main power switches.
• The unauthorized recording of TV programs,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
• Additional equipment and cables shown are not
supplied with this TV.
• (Sample for 32L365*)
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
NOTE:
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio ampli er's volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
• Turn off the ampli er before you connect or
disconnect the TV's power cord. If you leave the
ampli er power on, the speakers may be damaged.
28

Connecting HDMI or DVI devices

•

When turning on your electronic components,
turn on the TV rst, and then the HDMI and DVI
device.
• When turning off your electronic components,
turn off the HDMI and DVI device rst, and then
the TV.
• This TV may not be compatible with features and/
or speci cations that may be added in the future.
• This TV is only operable with L-PCM and Dolby
Digital on 32/44.1/48 kHz.
• This TV is able to connect with HDMI devices. But
it is possible that some HDMI devices may not
operate properly with this TV.
Connecting HDMI or DVI devices
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI and
uncompressed digital video from a DVI device.
This input is designed to accept HDCP program
material in digital from CEA-861-D compliant
consumer electronic devices (such as a set top box
and DVD player with HDMI and DVI output).
The HDMI input is designed for best performance
with 480i /480p/720p/1080i/(60Hz) (Video Format) ,

highde nition video signals, but will also accept
and display 576i /576p/720p/1080i (50Hz)(Video
Format)and 1080P 24Hz/25Hz/30Hz/50Hz/60Hz
(Video Format).
• HDMI: High-De nition Multimedia Interface
• HDCP: High-bandwidth Digital Content Protection
• CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth
digital content protection, which is being
standardized for reception of high-de nition
video signals. Because this is an evolving
technology, it is possible that some devices may
not operate properly with the TV.
• Acceptable PC signal format:
VGA (640 x 480) 60/75 Hz
S-VGA (800 x 600) 60/75 Hz
XGA (1024 x 768) 60/70/75 Hz
W-XGA (1280 x 768) 60/75 Hz
W-XGA (1360×768) 60 Hz
S-XGA (1280 x 1024) 60 Hz
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the compressed
image is displayed in S-XGA mode, therefore the
picture quality may deteriorate and characters may
not be read.
• L-PCM: Linear-Pulse Code Modulation
• Supported Audio format: L-PCM, Dolby Digital
sample rate 32/44,1/48 kHz