Sprint SLATE 10 User Manual page 141

Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the switch to Off
l
4. Tap a Wi-Fi network, enter the password, and tap CONNECT.
Your tablet is connected to the selected Wi-Fi network.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
l
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
Enable Scanning Always Available: From Wi-Fi settings, tap > Advanced > Scanning
n
always available. Tap the switch to On
Enable Notification When Open Networks Are Available: From Wi-Fi settings, tap >
n
Advanced > Network notification.
The setting is available when Wi-Fi is turned on.
l
Tap Network notification to turn the option on or off.
l
Set Timing for Pausing a Connection: From Wi-Fi settings, tap > Advanced > Keep Wi-Fi
n
on during sleep and then select a setting.
Enable Wi-Fi Only for Stable Connection: From Wi-Fi settings, tap > Advanced > Avoid
n
poor connections.
The setting is available when Wi-Fi is turned on.
l
Check the Avoid poor connections check box to turn the option on.
l
Install Certificates for Wi-Fi Authentication: From Wi-Fi settings, tap > Advanced >
n
Install certificates and then select a certificate stored in Google Drive, Downloads, the internal
storage, or the memory card.
Sharing Data with Other Wi-Fi Direct Devices: From Wi-Fi settings, tap > Advanced >
n
Wi-Fi Direct and then follow the onscreen instructions on both device to complete the
connection.
Initiate Wi-Fi Connection via WPS: From Wi-Fi settings, tap > Advanced > WPS Push
n
button or WPS PIN Entry. Push the WPS button or enter the PIN to initiate the connection.
Check MAC Address: From Wi-Fi settings, tap > Advanced.
n
MAC Address appears below "MAC address."
l
Settings
.
to enable this function.
134