Sprint SLATE 10 User Manual page 128

Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the switch to Off
l
4. Tap a Wi-Fi network to connect, enter the password (if it's not an open network), and then tap
CONNECT.
Your tablet is connected to the Wi-Fi network. You will see (
The password, for a household wireless LAN router, is sometimes found on a sticker on the
l
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
l
Note: The next time your tablet connects to a previously accessed secured wireless network, you
will not be prompted to enter the password again, unless you reset your tablet to its factory default
settings or you instruct the tablet to forget the network.
Connectivity
.
) in the status bar.
121