Program Radio Stations Manually; Select A Preset Radio Station; Other Features; Set The Alarm Timer - Philips DCM1170 User Manual

Program radio stations
manually
1
Tune to a radio station.
2
Press PROG, and then press
select a number from 1–20.
3
Press PROG to confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat steps 2-3 to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

In tuner mode, press
number.
Downloaded From DvDPlayer-Manual.com Philips Manuals
/ to
/ to select a preset

6 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can
select CD, FM, USB, or iPod/iPhone as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER for more than two seconds.
» The hour digits are displayed and begin
to blink.
2
Press / repeatedly to set hour, and
then press SLEEP/TIMER.
» The minute digits are displayed and
begin to blink.
3
Repeat step 2 to set minute, select a
source (CD, FM, USB, or iPod/iPhone), and
adjust volume.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to activate or
deactivate the alarm.
» If timer is activated,
Tip
•
If CD/USB/iPod/iPhone source is selected, but no disc
is placed or no USB/iPod/iPhone connected, the system
switches to the tuner source automatically.
is displayed.
EN
11