Sony MHC-GT4D Operating Instructions Manual page 19


Be careful not to get your hand
caught when putting the rod back
into the storing position.
2
Mount the speaker units to the
attachments.
 Open the lock lever.
 Align the bracket of the speaker
unit with the bracket of the
speaker attachment, and then
slide down to attach the speaker
unit.
Right
speaker
unit
 Close the lock lever.
Note
Be sure to close the lock lever when
detaching the speaker units as it may
generate noise during playback.
3
Fasten the speaker cables on the
mounting rod.
 Thread the speaker cable into
Left
Clip hole
speaker
unit
 Repeat step above to install all
4
Connect the speaker connectors
and LED speaker connectors to the
respective terminals.
For details, see illustration  in
page 21.
the cable clip and plug into the
clip hole on the mounting rod.
Cable
clip
the cable clips.
Clip hole
19 GB