Sony MHC-GT4D Operating Instructions Manual page 22

 Speakers
 LED SPEAKER L/R terminals
Connect the LED speaker connector
of the speaker to this terminal. The
lighting on the subwoofer and
speakers will react according to the
music source (page 52).
 SPEAKERS L/R terminals
Connect the speaker connector of
the speaker to this terminal.
Notes

Be sure to use only the supplied
speaker.

When connecting speaker cables, insert
the connector straight into the
terminals.
 FM ANTENNA
Find a location and an orientation that
provide good reception when you set
up the antenna.
Keep the antenna away from the
speaker cables, the AC power cord
(mains lead) and the USB cable to
avoid picking up noise.
Extend the FM
lead antenna
horizontally
 Audio
Use an audio cable (not supplied) to
make either connection as follows:
 AUDIO/PARTY CHAIN OUT L/R
jacks
 Connect to the audio input jacks of
an optional equipment.
 Connect to another audio system
to enjoy the Party Chain function
(page 49).
22 GB
 AUDIO/PARTY CHAIN IN (TV)
L/R jacks
 Connect to the audio output jacks
of a TV or an audio/video
equipment. The sound is output
through this system (page 23).
 Connect to another audio system
to enjoy the Party Chain function
(page 49).
 HDMI OUT (TV) jack
Use an HDMI cable (not supplied) to
connect to the HDMI IN jack of a TV
(page 23).
 VIDEO OUT jack
Use a video cable (not supplied) to
connect to the video input jack of a TV
or projector (page 23).
Note
Do not connect this system to the TV
through the video deck.
 Power
Connect the AC power cord (mains
lead) (supplied) to the system, then
plug it into a wall outlet.
The demonstration appears in the
display panel. Press  to turn on the
system and the demonstration
automatically ends.