Usb Transfer; Transferring Music - Sony MHC-GT4D Operating Instructions Manual

USB Transfer

Transferring music

You can transfer music from a disc
(AUDIO CD or MP3 disc only) to a USB
device connected to the
The audio format of files transferred by
this system is MP3.
Notes

Do not remove the USB device during
transfer or erase operations. Doing so
may corrupt the data on the USB device
or damage the USB device itself.

MP3 files are transferred with the same
bit rate as the original files.

When transferring from AUDIO CD, you
may select the bit rate before
transferring.

USB transfer and erase operations are
prohibited when the disc tray is opened.
Note on copyright-protected
content
The transferred music is limited to
private use only. Use of the music
beyond this limit requires permission
of the copyright holders.
To select the bit rate
You can select a higher bit rate to
transfer music with better quality.
1
Press OPTIONS.
2
Press /
RATE", then press
3
Press /
bit rate you want, then press

128 KBPS: encoded MP3 tracks
have smaller file size and lower
audio quality.

256 KBPS: encoded MP3 tracks
have bigger file size but higher
audio quality.
To exit the options menu, press
OPTIONS.
GB
36
(USB) port.
repeatedly to select "BIT
.
repeatedly to select the
Transferring music from a
disc
You can transfer music to a USB device
connected to
 Synchronized Transfer: Transfer all
supported music files from a disc to
USB.

REC1 Transfer: Transfer a single track
or audio file during playback.
Use the buttons on the subwoofer to
perform this operation.
1
Connect a transferable USB device
to the
2
Press FUNCTION repeatedly to
select "DVD/CD", then load a disc.
If the system starts playback
automatically, press  twice to stop
the playback.
3
Prepare the sound source.
For Synchronized Transfer:
When playback is stopped, press
PLAY MODE on the remote control
repeatedly to select the play mode
you want.
Note
If you start transferring in Shuffle Play
or Repeat Play, the selected play mode
changes to Normal Play automatically.
For REC1 Transfer:
Select the track or audio file you
want to transfer, then start
playback.
4
Press REC TO USB.
.
"PUSH ENTER" appears in the
display panel.
5
Press ENTER.
The transfer starts when "DO NOT
REMOVE" appears in the display
panel.
(USB) port as follows:
(USB) port.