Download Print this page

Philips RQ1197 User Manual page 25

Hide thumbs Also See for RQ1197:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Problem
The shaver does not
shave as well as it used
to.
The shaver does not
work when I press the
on/off button.
RQ1197CC,
RQ1195CC,
RQ1185CC,
RQ1180CC,
RQ1175CC only: The
shaver is not entirely
clean after I clean it in
the Jet Clean System.
Possible cause
The shaving heads are damaged or
worn.
Long hairs obstruct the shaving heads.
RQ1197CC, RQ1195CC,
RQ1185CC, RQ1180CC, RQ1175CC
only: The Jet Clean System has not
cleaned the shaver properly, because
the cleaning fluid in the cleaning
chamber is soiled or the cleaning fluid
level is too low.
The rechargeable battery is empty.
The travel lock is activated.
The shaving head holder is soiled or
damaged to such an extent that the
motor cannot run.
The temperature of the shaver is too
high. In this case, the shaver does not
work.
The cleaning fluid in the cleaning
chamber is soiled.
The cleaning fluid level is too low.
If the fluid volume in the cleaning
chamber drops below the minimum
level during the cleaning program, the
program aborts.The cleaning light and
the 'cleaning chamber empty' symbol
flash at intervals and the holder
returns to its starting position.
You have used another cleaning fluid
than the original Philips cleaning fluid.
ENGLISH
Solution
Replace the shaving head holder (see
chapter 'Replacement').
Clean the shaving heads by following
the steps of the extra-thorough
cleaning method (see chapter
'Cleaning and maintenance').
Clean the shaver thoroughly before
you continue shaving. If necessary,
clean and refill the cleaning
chamber (see chapter 'Cleaning and
maintenance').
Recharge the battery (see chapter
'Charging').
Press the on/off button for 3 seconds
to deactivate the travel lock.
Clean the shaving head holder or
replace it (see chapters 'Cleaning and
maintenance' and 'Replacement').
Let the shaver cool down. As soon
as the temperature of the shaver has
dropped sufficiently, you can switch
on the shaver again.
Empty and rinse the cleaning
chamber and refill it with new
cleaning fluid.
Refill the cleaning chamber with
cleaning fluid to a level between the
two lines (see chapter 'Cleaning and
maintenance').
Only use HQ200 Philips Cleaning
Fluid.
27

Advertisement

loading